医疗级PARA, 医疗/护理用品, 医疗器械, 医疗器材, ISO 10993, 玻璃纤维增强材料50%,辐射消毒, 电子束消毒, 环氧乙烷消毒, 抗伽马辐射, 生物兼容性

Ixef® HC-1022

聚丙烯酰胺

Solvay Specialty Polymers

Technical Data

 

产品说明

Ixef® HC-1022 is a 50% glass-fiber reinforced, general purpose polyarylamide compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.

 

Ixef® HC-1022 shows no evidence of cytotoxicity, sensitization, intracutaneous reactivity or systemic toxicity based on biocompatibility testing as defined by ISO 10993:1. Solvay offers these materials for healthcare applications that require limited exposure (less than 24 hours) to the body.

 

• Black: HC-1022 BK 000 

• Black: HC-1022 BK 001 

• Natural: HC-1022 NT 000 

• Gray: HC-1022 GY51 

• Additional colors available 

• Custom colorable 

 

总体

材料状态 • 已商用：当前有效

资料 1 • Technical Datasheet

UL 黄卡 2 • E95746-101887930

搜索 UL 黄卡 •  Solvay Specialty Polymers

•  Ixef®

供货地区 • 北美洲 • 拉丁美洲 • 亚太地区

• 非洲和中东 • 欧洲

填料/增强材料 • 玻璃纤维增强材料, 50% 填料按重量

• 超强刚性 • 辐射消毒 • 流动性高

• 尺寸稳定性良好 • 高强度

特性 • 出色的外观 • 好的消毒性 • 耐化学性良好

• 低吸湿性 • 环氧乙烷消毒 • 生物兼容性

• 电子束消毒 • 抗伽马辐射 • 通用

• 放射性可透的 • 良好的抗蠕变性

用途 • 高光应用 • 牙齿应用领域 • 医疗器材

• 外科器械 • 医疗/护理用品 • 医疗器械

机构评级 • ISO 10993 3

RoHS 合规性 • RoHS 合规

外观 • 黑色 • 可用颜色

• 灰色 • 自然色

形式 • 粒子

加工方法 • 注射成型

物理性能 干燥 调节后的 单位制   测试方法

密度 1.64 -- g/cm³ ISO 1183

收缩率 0.10 到 0.30 -- % ISO 294-4

吸水率 (24 hr, 73°F (23°C)) 0.16 -- % ISO 62

吸水性 - Equil, 65% RH 1.50 -- 内部方法

 

 

 

Ixef® HC-1022

聚丙烯酰胺

Solvay Specialty Polymers

机械性能 干燥 调节后的 单位制 测试方法

拉伸模量 2.83E+6 2.83E+6 psi ISO 527-2

(19500) (19500) (MPa)

拉伸应力 (断裂) 40600 37700 psi ISO 527-2

(280) (260) (MPa)

拉伸应变 (断裂) 1.9 2.2 % ISO 527-2

弯曲模量 2.68E+6 -- psi ISO 178

(18500) (MPa)

弯曲应力 55100 -- psi ISO 178

(380) (MPa)

冲击性能 干燥 调节后的 单位制 测试方法

悬壁梁缺口冲击强度 2.1 -- ft•lb/in ASTM D256

(110) (J/m)

无缺口悬臂梁冲击 16 -- ft•lb/in ASTM D256

(850) (J/m)

热性能 干燥 调节后的 单位制 测试方法

热变形温度 (264 psi (1.8 MPa), 未退火) 446 -- °F ISO 75-2/A

(230) (°C)

线形热膨胀系数 - 流动 8.3E-6 -- in/in/°F ISO 11359-2

(1.5E-5) (cm/cm/°C)

注射 干燥(英制) 干燥(公制)

干燥温度 248°F 120°C

干燥时间 0.50 到 1.5hr 0.50 到 1.5hr

料筒后部温度 482 到 500°F 250 到 260°C

料筒前部温度 500 到 554°F 260 到 290°C

射嘴温度 500 到 554°F 260 到 290°C

加工（熔体）温度 536°F 280°C

模具温度 248 到 284°F 120 到 140°C

注射速度 快速 快速

注射说明

Hot runners: 250°C to 260°C (482°C to 500°F)

 

Storage

Ixef® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef® processing guide.

 

Drying

The material as supplied is ready for molding without drying. However, If the bags have been open for longer than 24 hours, the material needs to be dried. When using a desiccant air dryer with dew point of -28°C (-18°F) or lower, these guidelines can be followed: 0.5-1.5 hour at 120°C (248°F), 1-3 hours at 100°C (212°F), or 1-7 hours at 80°C (176°F).

 

Injection Molding

Ixef® HC-1022 compound can be readily injection molded in most screw injection molding machines. A general purpose screw is recommended, with minimum back pressure.

 

The measured melt temperature should be about 280°C (536°F), and the barrel temperatures should be around 250 to 260°C (482 to 500°F) in the rear zone, gradually increasing to 260 to 290°C (500 to 554°F) in the front zone. If hot runners are used, they should be set to 250 to 260°C (482 to 500°F).

 

To maximize crystallinity, the temperature of the mold cavity surface must be held between 120 and 140°C (248 and 284°F). Molding at lower temperatures will produce articles that may warp, have poor surface appearance, and have a greater tendency to creep. Set injection pressure to give rapid injection. Adjust holding pressure and hold time to maximize part weight. Transfer from injection to hold pressure at the screw position just before the part is completely filled (95-99%).

 

 

 

 

 

 

 

医疗级抗伽马辐射PARA塑胶原料,医疗级抗伽马辐射聚丙烯酰胺塑胶原料,医疗级抗伽马辐射PARA Ixef® HC-1022是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123   13549213581 肖生    QQ：15397858   微信：13549213581