13549213581 肖生

 

 

FDA食品级尼龙6,良好耐磨损性，流动性低, 泵件, 阀门/阀门部件, 车轮, 防磨条, 衬套, 齿轮, 滚轴, 滑轮, 轴承

 

UNIPA® Mh

聚酰胺6

 

Nytef Plastics, Ltd.

 

Technical Data

 

产品说明

 

Since its introduction in 1938, Nylon has become one of the world's most widely recognized and utilized engineering grade thermoplastics. Nylon's unique combination of high strength, good toughness, outstanding chemical resistance, and excellent wear and abrasion resistance have made it the material of choice for product designs in a multitude of industries. When used to replace wear grade metals like brass and bronze, no other material provides the combination of extended wear life, light weight, and low fabricated part cost of Nylon. Nytef Plastics, Ltd. manufactures UNIPA® Nylon stock shapes in a wide variety of types and stock shape configurations. These UNIPA Nylon products fall into the categories of Type 6/6 Extruded UNIPA Nylons and Type 6 UNIPA M Cast Nylons. While both types of Nylon are very similar, there are performance and availability differences between the two

 

grades that should be noted:

 

UNIPA M Type 6 Cast Nylons:

• offer improved wear resistance

• are available in larger rod diameters (up to 13" dia.)

• are available in larger plate sizes (up to 48" x 96")

 

Nytef Plastics utilizes a proprietary nylon casting process to produce UNIPA M Nylon 6 stock shapes. This process allows Nylon rods, plates, and tubular bars with very thick cross sections to be economically produced with uniform physical properties and minimal internal stress levels. Nytef Plastic's UNIPA M Nylon 6 stock shapes are available in a wide range of grades including

 

lubricated, heat stabilized, and fiber reinforced products. UNIPA M Nylon 6 materials are offered in a complete range of round rod, heavy gauge plate, and tubular bar sizes.

 

总体

 

材料状态 • 已商用：当前有效

资料 1 •  Technical Datasheet (English)

供货地区 • 北美洲 • 欧洲

添加剂 • 热稳定剂

• 刚性，高 • 良好耐磨损性 • 热稳定性

特性 • 高强度 • 耐化学性良好

• 韧性良好

• 可切削 • 耐磨损性良好

• 泵件 • 阀门/阀门部件 • 矿业应用

• 车轮 • 防磨条 • 汽车领域的应用

用途 • 衬套 • 纺织应用 • 食品服务领域

• 齿轮 • 滚轴 • 液体处理

• 电气/电子应用领域 • 滑轮 • 轴承

• 电气元件 • 建筑应用领域 • 铸模/模具/工具

形式 • 棒材 • 预制件

物理性能 额定值单位制 测试方法

比重 1.15g/cm³ ASTM D792

吸水率 ASTM D570

24 hr 0.80%

饱和 6.0%

机械性能 额定值单位制 测试方法

拉伸模量 3100MPa ASTM D638

抗张强度 82.7MPa ASTM D638

伸长率 (断裂) 20 到 60% ASTM D638

弯曲模量 3450MPa ASTM D790

弯曲强度 107MPa ASTM D790

压缩强度 103MPa ASTM D695

摩擦系数 0.26 ASTM D1894

冲击性能 额定值单位制 测试方法

悬壁梁缺口冲击强度 43J/m ASTM D256

硬度 额定值单位制 测试方法

洛氏硬度 ASTM D785

M 级 85

R 级 115

 

UNIPA® Mh

聚酰胺6

Nytef Plastics, Ltd.

热性能 额定值单位制 测试方法

载荷下热变形温度 (1.8 MPa, 未退火) 98.9°C ASTM D648

连续使用温度 98.9°C 内部方法

熔融峰值温度 221°C ASTM D3418

线形热膨胀系数 - 流动 7.2E-5cm/cm/°C ASTM D696

电气性能 额定值单位制 测试方法

体积电阻率 > 1.0E+13ohm•cm ASTM D257

介电强度 3 16kV/mm ASTM D149

介电常数 (1 MHz) 3.70 ASTM D150

耗散因数 (60 Hz) 0.020 ASTM D150

可燃性 额定值单位制 测试方法

UL 阻燃等级 HB UL 94

 

 

 

FDA食品级尼龙6，FDA食品级聚酰胺6,PA6 UNIPA® Mh是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123 

13549213581 肖生