|
FDA食品级ABS,FDA食品级丙烯腈丁二烯苯乙烯,ABS FDA食品接触的合规性 ABS Diamond ABS 1000M是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
FDA食品级，光泽高,医疗/护理领域的应用
Diamond ABS 1000M
丙烯腈丁二烯苯乙烯
Network Polymers, Inc.
Technical Data
总体
材料状态 • 已商用：当前有效
资料 1 • Technical Datasheet
搜索 UL 黄卡 • Network Polymers, Inc.
• Diamond ABS
供货地区 • 北美洲
性能特点 • 光泽，高
用途 • 医疗/护理领域的应用
机构评级 • EC 1907/2006 (REACH) • EU 2002/96/EC
RoHS 合规性 • RoHS 合规
UL 档案号美国 • E150937
外观 • 可用颜色
形式 • 颗粒料
加工方法 • 注射成型
物理性能 额定值单位制 测试方法
比重 1.06g/cm³ ASTM D792
熔流率 ASTM D1238
200°C/5.0 kg 3.5g/10 min
230°C/3.8 kg 3 13g/10 min
收缩率 - 流动 0.40 到 0.60% ASTM D955
机械性能 额定值单位制 测试方法
抗张强度 4 (屈服) 51.7MPa ASTM D638
弯曲模量 - 正切 5 2540MPa ASTM D790
冲击性能 额定值单位制 测试方法
悬壁梁缺口冲击强度 (23°C, 3.18 mm) 80J/m ASTM D256
硬度 额定值单位制 测试方法
洛氏硬度 (R 计秤) 115 ASTM D785
热性能 额定值单位制 测试方法
热变形温度 ASTM D648
1.8 MPa, 未退火, 3.18 mm 78.0°C
1.8 MPa, 退火, 3.18 mm 92.8°C
维卡软化温度 104°C ASTM D1525
可燃性 额定值单位制 测试方法
UL 阻燃等级 (1.59 mm) HB UL 94
补充信息
MEDICAL BIOCOMPATIBILITY INFORMATION: All medical grade DIAMOND POLYMERS ABS resins (hereinafter "Product(s)'') meet the requirements of the USP CLASS VI. Only these PRODUCTS may be considered candidates for applications requiring biocompatibility. MANUFACTURER'S RESPONSIBILITY: It is the responsibility of the medical device, biological product or pharmaceutical
manufacturer ("Manufacturer") to determine the suitability of all component parts and raw materials, including any DIAMOND POLYMERS Product, used in its final product in order to ensure safety and compliance with FDA requirements. This determination must include, as applicable, testing for suitability as any non-implantable device and suitability for contact with and/or storage of human tissue and liquids including, without limitation, medication, blood or other bodily fluids and under no circumstances may any
DIAMOND POLYMERS Product be used in any implant applications (cosmetic, reconstructive or reproductive). The suitability of a DIAMOND POLYMERS product in a given end-use environment is dependent upon various conditions including, without limitation, chemical compatibility, temperature, part design, sterilization method, residual stresses or external loads. It is the responsibility of the
Manufacturer to evaluate its final device under actual end-use requirements and to adequately advise and warn purchasers and users thereof. Single-use medical devices made from a DIAMOND POLYMERS product are not suitable for multiple uses. If the medical device is designed for multiple uses, it is the responsibility of the Manufacturer to determine the appropriate number of permissible uses by evaluating the device under actual sterilization and end-use conditions and to adequately advise and warn purchasers and users thereof.
STERILIZATION INFORMATION: The sterilization method and the number of sterilization cycles a medical device made from a DIAMOND POLYMERS Product can withstand will vary depending upon type/grade of product, part design, processing parameters,
Diamond ABS 1000M
丙烯腈丁二烯苯乙烯
Network Polymers, Inc.
sterilization temperature, chemical environment and any other end-use application demands or requirements. Therefore, the MANUFACTURER must evaluate each device to determine the sterilization method and the number of permissible sterilization cycles appropriate for actual end-use requirements and most adequately advise and warn purchasers and users thereof.
The end use device produced by the manufacturer may be tested according to the ISO 10993 requirements. This testing is the responsibility of the device manufacturer. DIAMOND POLYMERS has elected to qualify their products for these applications by testing to USP Class VI requirements.
注射 额定值单位制
干燥温度 80.0 到 85.0°C
干燥时间 2.0 到 4.0hr
建议的最大水分含量 0.10%
螺筒后部温度 190 到 250°C
螺筒中部温度 190 到 250°C
螺筒前部温度 190 到 250°C
模具温度 40.0 到 80.0°C
注塑温度 48.3 到 75.8MPa
FDA食品级ABS,FDA食品级丙烯腈丁二烯苯乙烯,ABS FDA食品接触的合规性 ABS Diamond ABS 1000M是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123
13549213581 肖生
|
